You are currently viewing the Asia Pacific (English language) website

Description

Has two Hall Effect sensors; one detects speed and the other detects direction of movement of gear teeth. The outputs are open collector transistors. The Speed output goes high (on) when sensing the leading edge of a tooth and low (off) on the trailing edge of the tooth when run against a standard target. The direction of movement is latched on the leading edge of the speed sensor; the Direction output goes high for clockwise rotation and low for counterclockwise rotation. The state of the Direction output always leads the rising edge of the speed output

Features
  • Separate digital outputs for speed and direction
  • From near zero speed up to 15 kHz sensing capability
  • Plastic flange-mount sensor rated to 125 ⁰C
  • RoHS compliant
  • IP67
  • Typical air gap of 1.5 mm (0.06”)*
Typical Applications
  • Wheel speed and direction
  • Hoist speed and direction
  • Transmission speed and direction
  • Industrial feedback and control
Datasheet

*With recommended target type

Please refer to our desktop website for additional technical information and product availability

The list below shows standard part numbers that are typically available from one of our franchised distribution partners.

Use the product comparison feature to help find the right part for your application and then download the product-specific drawing and CAD file.

Check distribution channel stock by clicking on the appropriate dedicated link.

The list below shows standard part numbers that are typically available from one of our franchised distribution partners.

Having selected the right part for your application you can download the product-specific drawing and CAD file.

Check distribution channel stock by clicking on the appropriate dedicated link.

RESULTS PER PAGE
RESULTS 1 - 1 OF 1 
Part
Number
Check
Stock
Termination
Data
CAD
SD101201Click HereDelphi Metri-Pack 150 connector-View
RESULTS 1 - 1 OF 1
It is the responsibility of the user to determine product suitability. Specifications are subject to change without notice.