You are currently viewing the Americas website

Customer Service Number: (+1) 262 942-6500

Description

Non-contact, intrinsically linear contact angle position sensors with two independent outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft

Features
  • Angular position sensor with high tolerance for misalignment
  • Non-contact angular position sensing and full 360⁰ rotation
  • Dual independent (redundant) outputs assure high reliability
  • Custom programming available for: angle range, slope, PWM contact factory
  • No mechanical interface means no parts to wear out or jam
  • Comes with 18 AWG 305 mm (12”) wire leads
  • RoHS Compliant
  • IP68*
  • Maximum air gap of 5.5 mm (0.22”)**
Typical Applications
  • Implement (fork lift, agricultural trailer hitch, etc.) position sensing
  • Steer, throttle by wire
  • Gear selection
  • Zero-contact encoder alternative
  • Replacement for smart bearings
  • Outboard trim sensing
Datasheet

*submerged in 22±3 °C water for 1 hour at 2 m depth

**with AS500106 magnet carrier

The list below shows standard part numbers that are typically available from one of our franchised distribution partners.

Use the product comparison feature to help find the right part for your application and then download the product-specific drawing and CAD file.

Check distribution channel stock by clicking on the appropriate dedicated link.

The list below shows standard part numbers that are typically available from one of our franchised distribution partners.

Having selected the right part for your application you can download the product-specific drawing and CAD file.

Check distribution channel stock by clicking on the appropriate dedicated link.

RESULTS PER PAGE
RESULTS 1 - 4 OF 4 
Part
Number
Check
Stock
Description
Sensing Range
Termination
Data
CAD
AN920031Click HereSensor180°18 AWG x 305 mm leads-View
AN920032Click HereSensor360°18 AWG x 305 mm leads-View
AN920036Click HereSensor90°18 AWG x 305 mm leads-View
AS500106Click HereMagnet Carrier---View
RESULTS 1 - 4 OF 4
It is the responsibility of the user to determine product suitability. Specifications are subject to change without notice.