click images to enlarge
Description
Energy Harvesting receivers are available as either a packaged module, or as a “RF stamp” with wire antenna without plastic housing. The receiver module has multiple output options (i.e. RS232 TTL) and is suitable for wall-mounting. Flexible pairing allows the operation of several receivers with one switch and vice-versa, and the “Unique ID” assigned to each switch assists in avoiding interference when using multiple RF switches. Both receivers are compatible with ZF rocker and snap action switch products. See table at base of page for more information on standard products.
Technical Specifications RF Receiver- Frequency bands: 868.3 or 915.0 MHz
- Temperature range: -40 to +85 °C (-40 to +185 °F)
- Sensitivity: typ. -98 dBm
- Receiver class: Class 2
- Supply voltage: 5 VDC stabilised
- Supply voltage: 7 V to 24 VDC non-stabilised
- Supply voltage: 5 V USB
- Output Interfaces: 48 VAC or 230 VAC relay
- Output Interfaces: RS232 TTL, RS232 or RS485 bus
- Output Interfaces: Digital interface or SPI
- Output Interfaces: USB 2.0
- Antenna: Wire antenna with plastic sleeve
- Antenna: 50 Ohm output
- Frequency bands: 868.3 or 915.0 MHz
- Temperature range: -40 to +85 °C (-40 to +185 °F)
- Sensitivity: typ. -98 dBm
- Receiver class: Class 2
- Supply voltage: 5 V or 3.3 VDC
- Output Interfaces: 1x UART
- Output Interfaces: 4x GPIO
- Antenna: Wire antenna
- Antenna: 50 Ohm output
