Speed & Direction Sensor Kit
- System-kit for sensors
- High flexibility
- Angular position (wires/connector) of choice
- Immersion protection IP67 & IP69 (excluding wire/connector)
E-Bike Sensor
- Hall-based non contact
- Higo connector as standard
- Immune to vibration
- Typical air gap 0.4 – 1.8mm
ANG Sensors
- High tolerance for misalignment
- Full 360 degree rotation
- No mechanical interface
- 20 AWG 305 mm (12”) discrete wire leads
AN1 Sensors
- One-piece contact sensor
- Linear output from 5⁰ to 85⁰ of rotation
- Counter clockwise rotating
- 120⁰ of mechanical rotation
AN8 Sensors
- Non-contact, programmable
- Capable of continuous rotation
- 5.5 mm (0.22”) air gap when used with AS500106
- Available with connector or wires
AN9 Sensors
- Non-contact, programmable
- Capable of continuous rotation
- 5.5 mm (0.22”) air gap when used with AS500106
- Dual (redundant) outputs
MP1007 Sensors
- Compatible with unregulated power supply
- South pole activated
- IP67
- Aluminum housing
MP1013 Sensors
- Fastener-less design
- South pole sensitive
- IP67
- Glass-reinforeced nylon plastic housing
MP1021 Sensors
- Compatible with unregulated power supply
- Flange-mount
- IP67
- Glass-reinforced plastic housing
MP2007 Sensors
- 3.81 mm – 12.7 mm operate/release distances
- IP65
- Mounting hardware included
- Aluminum housing
MP2017 Sensors
- 3.81 mm – 12.7 mm operate/release distances
- IP65
- Supplied with 24 AWG leads
- Glass-reinforced Plastic housing
MP2018 Sensors
- 6.35 mm – 17.8 mm operate/release distances
- IP65
- Flange mount
- Glass-reinforced Plastic housing
MP2019 Sensors
- 10.16 mm – 22.86 mm operate/release distances
- IP65
- Flange mount
- Glass-reinforced Plastic housing
Sensor VN1015
- Robust, high speed sensing
- No mechancial contacts to wear out
- Immune to dusty/dirty environments
- Over-molded plastic housing
GS1001 – GS1002 Sensors
- Industrial spec speed sensors
- Compatible with unregulated power supply
- Wired or IEC connector
- Stainless steel housing
GS1005 – GS1007 Sensors
- Commercial spec speed sensors
- Compatible with unregulated power supply
- Wired or IEC connector
- Anodized aluminum housing
GS101201 – GS101202
- Industrial spec speed sensors
- Compatible with unregulated power supply
- Wired or Delphi connector
- Glass reinforced thermoplastic flange-mount housing
GS101205 Sensors
- Industrial spec speed sensors
- 140 ⁰C temperature rating
- Delphi connector
- Glass reinforced thermoplastic flange-mount housing
GS102301 Sensors
- Industrial spec speed sensor
- Temperature rating 140°C
- Delphi connector
- Glass reinforced thermoplastic housing
SD101201 Sensors
- Near zero speed to 15 kHz sensing capability
- -40 ⁰C to 125 ⁰C operating temp
- Direction output latched on leading edge of speed
- Aluminum housing
SD501201 Sensors
- Near zero speed up to 15 kHz sensing capability
- 40 ⁰C to 125 ⁰C operating temp
- Direction indicated by lead/lag with speed output
- Thermoplastic flanged housing
AS1010 Actuator Magnet Sensors
- South pole standard
- North pole available
- Threaded housing
- Aluminum housing standard
