General Purpose GP
Description
General purpose snap action switch with ultra-small travel differential; current rating up to 20A with screw or solder terminals available.Features
- Rated up to 20A
- Screw or solder terminals
- IP40
- Long mechanical operating life
Application
- Automated assembly lines
- Brake switch on utility vehicles
- Household appliances
- Industrial door openers
- Vending machines
- Brake switch on utility vehicles
Preferred Parts
Swipe to Browse
| Part Number | Check Stock | Configuration | Electrical Rating UL508 | Electrical Rating EN60947 | Terminal Type | Actuator Type | Data | CAD |
|---|---|---|---|---|---|---|---|---|
|
GPTBNH11 |
S.P.D.T. |
20A 250VAC |
15A 250VAC |
Screw |
Panelmount Overtravel Button Actuator |
|
||
|
GPTCNH11 |
S.P.D.T. |
15A 250VAC |
15A 250VAC |
Screw |
Panelmount Overtravel Button Actuator |
|
||
|
GPTCRH11 |
S.P.D.T. |
15A 250VAC |
15A 250VAC |
Screw |
Panelmount Overtravel Button Actuator |
|
||
|
GPTCRM11 |
S.P.D.T. |
15A 250VAC |
15A 250VAC |
Screw |
Short Hinge Roller Lever |
|
||
|
GPTCRS11 |
S.P.D.T. |
15A 250VAC |
15A 250VAC |
Screw |
Long Hinge Roller Lever |
|
||
|
GPTCRS01 |
S.P.D.T. |
15A 250VAC |
15A 250VAC |
Screw |
Long Hinge Roller Lever |
|||
|
GPTBLS01 |
S.P.D.T. |
20A 250VAC |
|
Screw |
Long Straight Lever |
on request |
||
|
GPTCLS01 |
S.P.D.T. |
15A 250VAC |
15A 250VAC |
Screw |
Long Straight Lever |
on request |
||
|
GPTCNH01 |
S.P.D.T. |
15A 250VAC |
15A 250VAC |
Screw |
Panelmount Overtravel Button Actuator |
|||
|
GPTCRH01 |
S.P.D.T. |
15A 250VAC |
15A 250VAC |
Screw |
Panelmount Overtravel Roller Actuator |
on request |
||
|
GPTCRH02 |
S.P.D.T. |
15A 250VAC |
15A 250VAC |
Screw |
Panelmount Overtravel Cross Roller Actuator |
on request |
||
|
GPTCRM01 |
S.P.D.T. |
15A 250VAC |
15A 250VAC |
Screw |
Short Hinge Roller Lever |
It is the responsibility of the user to determine product suitability. Specifications are subject to change without notice.
*Actuator length based on distance from pivot point
Related Products
LIN Sensors – Kit with magnet
- Easy setup and robust monitoring with M4 screws
- Dual independent (redundant) outputs assure high reliability
- No mechanical interface means no parts to wear out or jam
- Comes with 20 AWG 305 mm (12”) discrete wire leads or harness with connector
- RoHS compliant
- IP68*
- Compliant to industrial/automotive EMC/EMI/ESD directives
709-21995 Magnet Carrier
- Magnet carrier for ZF AN8, AN9 and ANG sensors
- PA 6 GF30 housing
- Samarium Cobalt 28 Magnet
ANG Sensors
- Angular position sensor with high tolerance for misalignment
- Non-contact angular position sensing and full 360O rotation
- Custom programming available for: angle range, slope, PWM output – contact factory
- No mechanical interface means no parts to wear out or jam
- Comes with 20 AWG 305 mm (12”) discrete wire leads
- RoHS Compliant
- IP68*
- Maximum air gap of 6 mm (0.24”)
- Compliant to industrial/automotive EMC/EMI/ESD directives
E-Bike Sensor
- Supply voltage: 6.5 – 20 VDC
- Signal Output low: 7+1.4/-1.1 mA
- Signal Output high: 14+2.8/-2.2 mA
- Operating frequency: 1 – 2.5 kHz
- Operating temperature: -25°C – 85°C
Speed & Direction Sensor Kit
- Capable of measuring from near zero up to 20 KHz.
- Variable shaft length (20 to 80 mm)
- Variable shaft diameter (12 to 20 mm)
- 2-wire, 3-wire, 4-wire output
- Cable interface (connector upon request)
- Rotatable shaft head (to determine angle of wire outlet)
- Flexible wire orientation (horizontal or right-angle)
- Wire harness option with customer-specific connector (available on request)
- Available with open-collector, PWM or Current signal outputs
GS101205 Sensors
- From near zero speed up to 15 kHz sensing capability
- Plastic flange-mount housing
- Resistant to fuels, solvents, and lubricants associated with engines, transmissions, brakes and chassis systems
- ROHS compliant
- IP67
- Typical air gap of 1.5 mm*
MP1007 Sensors
- Solid state reliability
- Stable output over operating temperature range
- Compatible with unregulated power supply
- South pole activated
- Open collector (sinking or NPN) output can be used with bipolar or CMOS logic circuits with suitable pull-up resistor
- RoHS compliant
- IP67
MP2019 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- Mounting hardware included
- IP65
- Operate/Release Distances*: 10.16 mm – 22.86 mm (0.4” – 0.97”)
MP2018 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- Mounting hardware included
- IP65
- Operate/Release Distances*: 6.35 mm – 17.8 mm (0.25” – 0.7”)
MP2017 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- IP65
- Operate/Release Distances*: 3.81 mm – 12.7 mm (0.15” – 0.5”)
MP1021 Sensors
- Solid state reliability
- Flange-mount housing
- Stable output over operating temperature range
- Compatible with unregulated power supply
- Open collector (sinking or NPN) output can be used with bipolar or CMOS logic circuits with suitable pull-up resistor
- North pole sensitive
- Unipolar device
- RoHS compliant
- IP67
MP2007 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- Mounting hardware included
- IP65
- Operate/Release Distances*: 3.81 mm – 12.7 mm (0.15” – 0.5”)
Distributor Stock Check.
Search our established network of franchised distributors and representatives
