Browse our extensive ranges of high-performance Switches & Sensors or Energy Harvesting products
我们的产品范围
LIN Sensors – Kit with magnet
- Easy setup and robust monitoring with M4 screws
- Dual independent (redundant) outputs assure high reliability
- No mechanical interface means no parts to wear out or jam
- Comes with 20 AWG 305 mm (12”) discrete wire leads or harness with connector
- RoHS compliant
- IP68*
- Compliant to industrial/automotive EMC/EMI/ESD directives
709-21995 Magnet Carrier
- Magnet carrier for ZF AN8, AN9 and ANG sensors
- PA 6 GF30 housing
- Samarium Cobalt 28 Magnet
ANG Sensors
- Angular position sensor with high tolerance for misalignment
- Non-contact angular position sensing and full 360O rotation
- Custom programming available for: angle range, slope, PWM output – contact factory
- No mechanical interface means no parts to wear out or jam
- Comes with 20 AWG 305 mm (12”) discrete wire leads
- RoHS Compliant
- IP68*
- Maximum air gap of 6 mm (0.24”)
- Compliant to industrial/automotive EMC/EMI/ESD directives
E-Bike Sensor
- Supply voltage: 6.5 – 20 VDC
- Signal Output low: 7+1.4/-1.1 mA
- Signal Output high: 14+2.8/-2.2 mA
- Operating frequency: 1 – 2.5 kHz
- Operating temperature: -25°C – 85°C
Speed & Direction Sensor Kit: SD74, SD84, SDB4 Sensors
- Capable of measuring from near zero up to 20 KHz.
- Variable shaft length (20 to 80 mm)
- Variable shaft diameter (12 to 20 mm)
- 2-wire, 3-wire, 4-wire output
- Cable interface (connector upon request)
- Rotatable shaft head (to determine angle of wire outlet)
- Flexible wire orientation (horizontal or right-angle)
- Wire harness option with customer-specific connector (available on request)
- Available with open-collector, PWM or Current signal outputs
GS101205 Sensors
- From near zero speed up to 15 kHz sensing capability
- Plastic flange-mount housing
- Resistant to fuels, solvents, and lubricants associated with engines, transmissions, brakes and chassis systems
- ROHS compliant
- IP67
- Typical air gap of 1.5 mm*
MP1007 Sensors
- Solid state reliability
- Stable output over operating temperature range
- Compatible with unregulated power supply
- South pole activated
- Open collector (sinking or NPN) output can be used with bipolar or CMOS logic circuits with suitable pull-up resistor
- RoHS compliant
- IP67
MP2019 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- Mounting hardware included
- IP65
- Operate/Release Distances*: 10.16 mm – 22.86 mm (0.4” – 0.97”)
MP2018 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- Mounting hardware included
- IP65
- Operate/Release Distances*: 6.35 mm – 17.8 mm (0.25” – 0.7”)
MP2017 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- IP65
- Operate/Release Distances*: 3.81 mm – 12.7 mm (0.15” – 0.5”)
MP1021 Sensors
- Solid state reliability
- Flange-mount housing
- Stable output over operating temperature range
- Compatible with unregulated power supply
- Open collector (sinking or NPN) output can be used with bipolar or CMOS logic circuits with suitable pull-up resistor
- North pole sensitive
- Unipolar device
- RoHS compliant
- IP67
MP2007 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- Mounting hardware included
- IP65
- Operate/Release Distances*: 3.81 mm – 12.7 mm (0.15” – 0.5”)
E19/20 Series
- Robust standard switch for industrial applications
- 5 current ratings, up to 30 A
- Cadmium contacts for high load requirements
- Wide variety of auxiliary actuators available
- 3 terminal types (optional screw terminals available)
- 3 contact configurations
- High-temperature 150 °C
- Long-life coil spring mechanism
Ultraminiature DH – Upgraded
- Extremely small dimensions - 8.4 mm × 2.7 mm × 6.55 mm only
- Increased temperature range of -25°C to 85°C
- Degree of protection IP40
- Solder connection straight, RH and LH side possible
Sub-subminiature DG – Upgraded
- Extremely small dimensions – only 12.8 x 5.8 x 6.6 mm
- Approvals up to 3 A 125 VAC (ENEC, UL), DC rating up to 3 A, 30 VDC (UL)
- Available with or without auxiliary actuator
- Operating temperature -25 to +125 °C
- Mechanical life up to 1 x 106 operations (model dependant)
- Degree of protection IP40
E13/14 Series
- Robust standard switch for industrial applications
- 5 current ratings, up to 30 A
- Cadmium contacts for high load requirements
- Wide variety of auxiliary actuators available
- 3 terminal types (optional screw terminals available)
- 3 contact configurations
- High-temperature 150 °C
- Long-life coil spring mechanism
General Purpose GP
- Rated up to 20A
- Screw or solder terminals
- Cadmium contacts for high load requirements
- Long mechanical operating life
- IP40
Sub-subminiature DR
- Temperature range -40 °C to +85 °C/105 ° C
- Nominal currents 5 mA up to 2 A at 12 V DC
- Auxiliary actuator on request
- High contact stability thanks to AuAg crosspoint
- Mechanical life min. 1 million operations
- Various connection possibilities
Pushbutton KF Series
- IP65 Pushbutton switch
- AC and DC electrical ratings
- Single-pole and double-pole configurations
- Lighted and non-lighted versions available
- 20 Amps
Rocker KD Series
- IP65
- AC and DC electrical ratings
- Single-pole and double-pole configurations
- Lighted and non-lighted versions available
- Maintained-action and momentary options
- 16 Amps
Rocker KG Series
- Enclosed switch complying to IP56
- AC and DC electrical ratings
- Single-pole and double-pole configurations
- Maintained-action and momentary options
- 20 Amps
Rocker KR Series
- Industry standard miniature package
- Enclosed switch complying to IP65
- AC and DC electrical ratings
- Lighted and non-lighted versions available
- Maintained-action and momentary options
- 16 Amps
Rocker RR Series
- AC electrical ratings
- Lighted and non-lighted versions available
- Two position
- Single and double-pole options
- 10 Amps
Rocker KT Series
- Enclosed switch complying to IP56
- AC and DC electrical ratings
- Lighted and non-lighted versions available
- 20 Amps
EnOcean® Protocol Products
- 2-way wireless switch module
- Fully compatible with existing EnOcean Certified 3.0 wireless systems
- Using RF standard ISO / IEC 14543-3-10/10
- Flexibility in application design and easy to install – no cables necessary
- Long lifetime (100,000 switching cycles) and no batteries – maintenance-free
- Suitable for all Energy Harvesting switch series
- ZF as member of the EnOcean Alliance enables customer specific RF solutions
KNX Products & Accessories
- 2-way wireless switch
- KNX-RF 2.0 Ready S-mode
- Configurable with ETS 5
- Frequency band 868.3
- Temperature range: -20 to +45 °C (-40 to +113 °F)
- Operating distance: up to 30 m (in buildings)
- Operating force: > 10 N
- Protocol transmission time: approx. 19 ms
Energy Harvesting Generators
- Available in monostable & bistable form
- Dimensions: 20.1 x 7.1 x 14.3 mm
- Energy Output: min. 0.33 mWs
- Temperature range: -40 to +85 °C
ZF Certificates
ZF operates world wide according certified standards. On this page you will find the current certificates of the ZF sites, world wide.
ZF Switches & Sensors
ZF is a global technology company that supplies systems for passenger cars, commercial vehicles, and industrial technology. By providing innovative solutions, ZF plays a crucial role in enabling the next generation of mobility.
Their products and technologies are designed to enhance the safety, efficiency, and convenience of transportation, catering to the evolving needs of the automotive and industrial sectors.
Distributor Stock Check.
搜索我们已经建立的授权经销商和代表
