Filter

709-21995 Magnet Carrier

Description Angle Position Sensors - 709-21995 Magnet Carrier
  • Magnet carrier for ZF AN8, AN9 and ANG sensors
  • PA 6 GF30 housing
  • Samarium Cobalt 28 Magnet
Read More

AN1 Sensors

One-piece, intrinsically linear contact angle position sensors. The sensors operate through the use of Hall…
  • Patented intrinsically linear angle position sensor (ILAPS)
  • Magnet/sensor orientation provides linear output from 5⁰ to 85⁰ of rotation without the need for electrical compensation
  • Return spring provides resistance to CCW motion
  • Fully encapsulated electronics
  • RoHS compliant
  • IP67
Read More

AN8 Sensors

Non-contact, intrinsically linear contact angle position sensors. The sensors operate through the use of Hall…
  • Angular position sensor with high tolerance for misalignment
  • Non-contact angular position sensing and full 360⁰ rotation
  • Custom programming available for: angle range, slope, PWM output, custom magnets – contact factory
  • No mechanical interface means no parts to wear out or jam
  • Available with Delphi connector or 12” (305 mm) wire leads
  • RoHS compliant
  • IP67
  • Maximum air gap of 5.5 mm (0.22”)*
Read More

AN9 Sensors

Non-contact, intrinsically linear contact angle position sensors with two independent outputs. The sensors operate through…
  • Angular position sensor with high tolerance for misalignment
  • Non-contact angular position sensing and full 360⁰ rotation
  • Dual independent (redundant) outputs assure high reliability
  • Custom programming available for: angle range, slope, PWM output, custom magnets - contact factory
  • No mechanical interface means no parts to wear out or jam
  • Comes with 18 AWG 305 mm (12”) wire leads
  • RoHS Compliant
  • IP68*
  • Maximum air gap of 5.5 mm (0.22”)**
Read More

ANG Sensors

The ANG Series sensors are non-contact, intrinsically linear position sensors with one or two independent…
  • Angular position sensor with high tolerance for misalignment
  • Non-contact angular position sensing and full 360O rotation
  • Custom programming available for: angle range, slope, PWM output – contact factory
  • No mechanical interface means no parts to wear out or jam
  • Comes with 20 AWG 305 mm (12”) discrete wire leads
  • RoHS Compliant
  • IP68*
  • Maximum air gap of 6 mm (0.24”)
  • Compliant to industrial/automotive EMC/EMI/ESD directives
Read More

AS1010 Actuator Magnet Sensors

It is the responsibility of the user to determine product suitability. Specifications are subject to…
  • Easy to install actuator magnet with threaded aluminium housing
  • South-pole facing Alnico magnet
  • Adjustable threaded mounting stud
  • Operating and storage temperature 40 – 150°C
  • North-pole version also available – Part No. AS101002
Read More

AS500106 Magnet Carrier

It is the responsibility of the user to determine product suitability. Specifications are subject to…
  • Magnet carrier for ZF AN8, AN9 & ANG sensors
  • PPS Housing
  • SmCo28 Magnet
Read More

E-Bike Sensor

Hall based non-contact and solid-state sensor for speed detection. High resolution in combination with speed…
  • Supply voltage: 6.5 – 20 VDC
  • Signal Output low: 7+1.4/-1.1 mA
  • Signal Output high: 14+2.8/-2.2 mA
  • Operating frequency: 1 – 2.5 kHz
  • Operating temperature: -25°C – 85°C
Read More

GS1001 – GS1002 Sensors

Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing…
  • From near zero speed up to 15 kHz sensing capability
  • 10 bit dynamic threshold direction offers:
  • – Automatically adjusting magnetic range
  • – Self-compensating to target geometry
  • Compatible with unregulated power supply
  • RoHS compliant
  • IP67
  • Typical air gap of 1.5 mm*
Read More

GS1005 – GS1007 Sensors

Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing…
  • From near zero speed up to 15 kHz sensing capability
  • 10 bit dynamic threshold direction offers:
  • – Automatically adjusting magnetic range
  • – Self-compensating to target geometry
  • Compatible with unregulated power supply
  • ROHS compliant
  • IP67
  • Typical air gap of 1.5 mm*
Read More

GS101201 – GS101202

Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing…
  • From near zero speed up to 15 kHz sensing capability
  • Plastic flange-mount housing
  • Compatible with unregulated power supply
  • ROHS compliant
  • IP67
  • Typical air gap of 1.5 mm*
Read More

GS101205 Sensors

Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing…
  • From near zero speed up to 15 kHz sensing capability
  • Plastic flange-mount housing
  • Resistant to fuels, solvents, and lubricants associated with engines, transmissions, brakes and chassis systems
  • ROHS compliant
  • IP67
  • Typical air gap of 1.5 mm*
Read More