Preferred Parts
Swipe to Browse
| Part Number | Check Stock | Electrical Rating UL1054 | Actuator Type | Operating Force Max | Data | CAD | |
|---|---|---|---|---|---|---|---|
|
0G13-50H0 |
S.P.D.T |
0.1 A, 125 VAC; 0.1 A, 30 VDC |
High ratio straight lever |
65 g |
|||
|
0G13-00M0 |
S.P.D.T |
0.1 A, 125 VAC; 0.1 A, 30 VDC |
Overtravel button with ferrule |
425 g |
|||
|
0E14-50H0 |
25A, 125/250VAC, 1HP 125VAC, 2HP 250VAC |
High ratio straight lever |
285 g |
||||
|
0E14-01M0 |
25A, 125/250VAC, 1HP 125VAC, 2HP 250VAC |
Overtravel button with ferrule |
850 g |
||||
|
0E14-00K0 |
25A 125/250VAC; 1HP 125VAC 2HP 250VAC; 2A 48VDC |
Roller lever |
285 g |
||||
|
0E14-00H0 |
25A, 125/250VAC; 3/4HP 125VAC |
Straight lever |
285 g |
||||
|
0E14-00A0 |
25A, 125/250VAC; 3/4HP 125VAC |
Button |
850 g |
||||
|
0E13-01H0 |
25A 125/250VAC; 1HP 125VAC 2HP 250VAC; 2A 48VDC |
Straight lever |
100 g |
||||
|
0E13-01E0 |
15A, 125/250VAC; 3/4HP 125VAC |
Button |
425 g |
||||
|
0E13-00E0 |
15A 125/250VAC / ¾ HP 125VAC / 1 ½ HP 250VAC / 2A 48VDC |
Button |
425 g |
||||
|
0E13-00H0 |
15A 125/250VAC / ¾ HP 125VAC / 1 ½ HP 250VAC / 2A 48VDC |
Straight lever |
100 g |
||||
|
0E13-00J0 |
15A 125/250VAC / ¾ HP 125VAC / 1 ½ HP 250VAC / 2A 48VDC |
Button with ferrule |
425 g |
||||
|
0E13-00K0 |
15A 125/250VAC / ¾ HP 125VAC / 1 ½ HP 250VAC / 2A 48VDC |
Roller lever |
100 g |
||||
|
0E13-00M0 |
15A 125/250VAC / ¾ HP 125VAC / 1 ½ HP 250VAC / 2A 48VDC |
Overtravel button with ferrule |
425 g |
||||
|
0E13-50H0 |
15A 125/250VAC / ¾ HP 125VAC / 1 ½ HP 250VAC / 2A 48VDC |
High ratio straight lever |
65 g |
||||
|
0E14-00M0 |
25A 125/250VAC / 1 HP 125VAC / 2 HP 250VAC / 2A 48VDC |
Overtravel button with ferrule |
850 g |
Part numbers with a leading 0 and a trailing 0 are functionally no different than without a leading / trailing 0.
It is the responsibility of the user to determine product suitability. Specifications are subject to change without notice.
*Actuator length based on distance from pivot point
Related Products
LIN Sensors – Kit with magnet
- Easy setup and robust monitoring with M4 screws
- Dual independent (redundant) outputs assure high reliability
- No mechanical interface means no parts to wear out or jam
- Comes with 20 AWG 305 mm (12”) discrete wire leads or harness with connector
- RoHS compliant
- IP68*
- Compliant to industrial/automotive EMC/EMI/ESD directives
709-21995 Magnet Carrier
- Magnet carrier for ZF AN8, AN9 and ANG sensors
- PA 6 GF30 housing
- Samarium Cobalt 28 Magnet
ANG角度传感器
- 高精度角度位置传感器，对偏差具有极高的容差
- 非接触式角度位置传感，可360°全方位旋转
- 可定制编程，包括：角度范围、斜率、PWM输出 – 请联系厂家
- 无机械接触，避免部件磨损或卡滞
- 配备20 AWG 305 mm（12英寸）独立导线
- 符合RoHS标准
- IP68*防护等级
- 最大气隙6 mm（0.24英寸）
- 符合工业/汽车EMC/EMI/ESD指令
电动自行车传感器
- 供电电压：6.5 – 20 VDC
- 低电平信号输出：7+1.4/-1.1 mA
- 高电平信号输出：14+2.8/-2.2 mA
- 工作频率：1 – 2.5 kHz
- 工作温度：-25°C – 85°C
速度和方向传感器套件: SD74, SD84, SDB4
- 测量范围从接近零到 20 kHz。
- 可变轴长（20 至 80 毫米）
- 可变轴径（12 至 20 毫米）
- 2 线、3 线、4 线输出
- 电缆接口（连接器可按需提供）
- 可旋转轴头（用于确定线束出口角度）
- 灵活的线束方向（水平或垂直出线）
- 可选配带客户定制连接器的线束（可按需提供）
- 提供开路集电极、PWM 或电流信号输出
GS101205 Sensors
- From near zero speed up to 15 kHz sensing capability
- Plastic flange-mount housing
- Resistant to fuels, solvents, and lubricants associated with engines, transmissions, brakes and chassis systems
- ROHS compliant
- IP67
- Typical air gap of 1.5 mm*
MP1007 Sensors
- Solid state reliability
- Stable output over operating temperature range
- Compatible with unregulated power supply
- South pole activated
- Open collector (sinking or NPN) output can be used with bipolar or CMOS logic circuits with suitable pull-up resistor
- RoHS compliant
- IP67
MP2019 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- Mounting hardware included
- IP65
- Operate/Release Distances*: 10.16 mm – 22.86 mm (0.4” – 0.97”)
MP2018 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- Mounting hardware included
- IP65
- Operate/Release Distances*: 6.35 mm – 17.8 mm (0.25” – 0.7”)
MP2017 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- IP65
- Operate/Release Distances*: 3.81 mm – 12.7 mm (0.15” – 0.5”)
MP1021 Sensors
- Solid state reliability
- Flange-mount housing
- Stable output over operating temperature range
- Compatible with unregulated power supply
- Open collector (sinking or NPN) output can be used with bipolar or CMOS logic circuits with suitable pull-up resistor
- North pole sensitive
- Unipolar device
- RoHS compliant
- IP67
MP2007 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- Mounting hardware included
- IP65
- Operate/Release Distances*: 3.81 mm – 12.7 mm (0.15” – 0.5”)
Distributor Stock Check.
搜索我们已经建立的授权经销商和代表
