Skip to main content

switches.sensors.energy harvesting.

switches.sensors.energy harvesting.

Subminiature DCJK

Description

Highly versatile IP 6K7 sealed subminiature switch.

Features

  • Switching current up to 10 A at 12 VDC
  • 4 different operating points and 3 wire socket heights
  • High contact stability due to specific contact materials
  • Actuators can also be retrofitted
  • Operating temperature up to 120 °C
  • Silicon-free version available

Application

  • Automotive
  • Appliances
  • Drives
  • Power Tools
Download Datasheet

It is the responsibility of the user to determine product suitability. Specifications are subject to change without notice.
*Actuator length based on distance from pivot point

Related Products

View All Sensors

Filter

LIN Sensors – Kit with magnet

The LIN Series sensors are non-contact linear position sensors with one or two independent outputs.…
  • Easy setup and robust monitoring with M4 screws
  • Dual independent (redundant) outputs assure high reliability
  • No mechanical interface means no parts to wear out or jam
  • Comes with 20 AWG 305 mm (12”) discrete wire leads or harness with connector
  • RoHS compliant
  • IP68*
  • Compliant to industrial/automotive EMC/EMI/ESD directives
Read More

709-21995 Magnet Carrier

Description Angle Position Sensors - 709-21995 Magnet Carrier
  • Magnet carrier for ZF AN8, AN9 and ANG sensors
  • PA 6 GF30 housing
  • Samarium Cobalt 28 Magnet
Read More

ANG Sensors

The ANG Series sensors are non-contact, intrinsically linear position sensors with one or two independent…
  • Angular position sensor with high tolerance for misalignment
  • Non-contact angular position sensing and full 360O rotation
  • Custom programming available for: angle range, slope, PWM output – contact factory
  • No mechanical interface means no parts to wear out or jam
  • Comes with 20 AWG 305 mm (12”) discrete wire leads
  • RoHS Compliant
  • IP68*
  • Maximum air gap of 6 mm (0.24”)
  • Compliant to industrial/automotive EMC/EMI/ESD directives
Read More

E-Bike Sensor

Hall based non-contact and solid-state sensor for speed detection. High resolution in combination with speed…
  • Supply voltage: 6.5 – 20 VDC
  • Signal Output low: 7+1.4/-1.1 mA
  • Signal Output high: 14+2.8/-2.2 mA
  • Operating frequency: 1 – 2.5 kHz
  • Operating temperature: -25°C – 85°C
Read More

Speed & Direction Sensor Kit

Hall Effect speed & direction sensors designed to detect ferromagnetic structures.  A modular-based design allows…
  • Capable of measuring from near zero up to 20 KHz.
  • Variable shaft length (20 to 80 mm)
  • Variable shaft diameter (12 to 20 mm)
  • 2-wire, 3-wire, 4-wire output
  • Cable interface (connector upon request)
  • Rotatable shaft head (to determine angle of wire outlet)
  • Flexible wire orientation (horizontal or right-angle)
  • Wire harness option with customer-specific connector (available on request)
  • Available with open-collector, PWM or Current signal outputs
Read More

GS101205 Sensors

Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing…
  • From near zero speed up to 15 kHz sensing capability
  • Plastic flange-mount housing
  • Resistant to fuels, solvents, and lubricants associated with engines, transmissions, brakes and chassis systems
  • ROHS compliant
  • IP67
  • Typical air gap of 1.5 mm*
Read More

MP1007 Sensors

One-piece non-contact solid-state position sensors that operate through the use of Hall Effect technology with…
  • Solid state reliability
  • Stable output over operating temperature range
  • Compatible with unregulated power supply
  • South pole activated
  • Open collector (sinking or NPN) output can be used with bipolar or CMOS logic circuits with suitable pull-up resistor
  • RoHS compliant
  • IP67
Read More

MP2019 Sensors

Reed position sensors with normally open or closed contacts that change states when a magnetic…
  • Contacts hermetically sealed for long life
  • Zero power consumption
  • Suitable for DC and AC circuits
  • RoHS compliant
  • Mounting hardware included
  • IP65
  • Operate/Release Distances*: 10.16 mm – 22.86 mm (0.4” – 0.97”)
Read More

MP2018 Sensors

Reed position sensors with normally open or closed contacts that change states when a magnetic…
  • Contacts hermetically sealed for long life
  • Zero power consumption
  • Suitable for DC and AC circuits
  • RoHS compliant
  • Mounting hardware included
  • IP65
  • Operate/Release Distances*: 6.35 mm – 17.8 mm (0.25” – 0.7”)
Read More

MP2017 Sensors

Reed position sensors with normally open or closed contacts that change states when a magnetic…
  • Contacts hermetically sealed for long life
  • Zero power consumption
  • Suitable for DC and AC circuits
  • RoHS compliant
  • IP65
  • Operate/Release Distances*: 3.81 mm – 12.7 mm (0.15” – 0.5”)
Read More

MP1021 Sensors

One-piece non-contact solid-state position sensors that operate through the use of Hall Effect technology with…
  • Solid state reliability
  • Flange-mount housing
  • Stable output over operating temperature range
  • Compatible with unregulated power supply
  • Open collector (sinking or NPN) output can be used with bipolar or CMOS logic circuits with suitable pull-up resistor
  • North pole sensitive
  • Unipolar device
  • RoHS compliant
  • IP67
Read More

MP2007 Sensors

Reed position sensors with normally open or closed contacts that change states when a magnetic…
  • Contacts hermetically sealed for long life
  • Zero power consumption
  • Suitable for DC and AC circuits
  • RoHS compliant
  • Mounting hardware included
  • IP65
  • Operate/Release Distances*: 3.81 mm – 12.7 mm (0.15” – 0.5”)
Read More
View All Sensors

Distributor Stock Check.

Search our established network of franchised distributors and representatives