SD501201 Sensors
Description
Has two Hall Effect sensors; one detects speed and the other detects direction of movement of gear teeth. The outputs are open collector transistors. Each Hall Effect sensor provides one square wave pulse for each tooth. The Speed output goes high (on) when sensing the leading edge of a tooth and low (off) on the trailing edge of the tooth when run against a standard target. The direction of movement is indicated by which channel leads the otherFeatures
- Immune to target run out
- Separate digital outputs for speed and direction
- From near zero speed up to 15 kHz sensing capability
- Plastic flange-mount sensor rated to 125 ⁰C
- RoHS compliant
- IP67
- Typical air gap of 1.5 mm (0.06”)*
Application
- Wheel speed and direction
- Hoist speed and direction
- Transmission speed and direction
- Industrial feedback and control
- Hoist speed and direction
It is the responsibility of the user to determine product suitability. Specifications are subject to change without notice.
*Actuator length based on distance from pivot point
Related Products
LIN Sensors – Kit with magnet
- Easy setup and robust monitoring with M4 screws
- Dual independent (redundant) outputs assure high reliability
- No mechanical interface means no parts to wear out or jam
- Comes with 20 AWG 305 mm (12”) discrete wire leads or harness with connector
- RoHS compliant
- IP68*
- Compliant to industrial/automotive EMC/EMI/ESD directives
709-21995 Magnet Carrier
- Magnet carrier for ZF AN8, AN9 and ANG sensors
- PA 6 GF30 housing
- Samarium Cobalt 28 Magnet
ANG Sensors
- Angular position sensor with high tolerance for misalignment
- Non-contact angular position sensing and full 360O rotation
- Custom programming available for: angle range, slope, PWM output – contact factory
- No mechanical interface means no parts to wear out or jam
- Comes with 20 AWG 305 mm (12”) discrete wire leads
- RoHS Compliant
- IP68*
- Maximum air gap of 6 mm (0.24”)
- Compliant to industrial/automotive EMC/EMI/ESD directives
E-Bike Sensor
- Supply voltage: 6.5 – 20 VDC
- Signal Output low: 7+1.4/-1.1 mA
- Signal Output high: 14+2.8/-2.2 mA
- Operating frequency: 1 – 2.5 kHz
- Operating temperature: -25°C – 85°C
Speed & Direction Sensor Kit
- Capable of measuring from near zero up to 20 KHz.
- Variable shaft length (20 to 80 mm)
- Variable shaft diameter (12 to 20 mm)
- 2-wire, 3-wire, 4-wire output
- Cable interface (connector upon request)
- Rotatable shaft head (to determine angle of wire outlet)
- Flexible wire orientation (horizontal or right-angle)
- Wire harness option with customer-specific connector (available on request)
- Available with open-collector, PWM or Current signal outputs
GS101205 Sensors
- From near zero speed up to 15 kHz sensing capability
- Plastic flange-mount housing
- Resistant to fuels, solvents, and lubricants associated with engines, transmissions, brakes and chassis systems
- ROHS compliant
- IP67
- Typical air gap of 1.5 mm*
MP1007 Sensors
- Solid state reliability
- Stable output over operating temperature range
- Compatible with unregulated power supply
- South pole activated
- Open collector (sinking or NPN) output can be used with bipolar or CMOS logic circuits with suitable pull-up resistor
- RoHS compliant
- IP67
MP2019 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- Mounting hardware included
- IP65
- Operate/Release Distances*: 10.16 mm – 22.86 mm (0.4” – 0.97”)
MP2018 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- Mounting hardware included
- IP65
- Operate/Release Distances*: 6.35 mm – 17.8 mm (0.25” – 0.7”)
MP2017 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- IP65
- Operate/Release Distances*: 3.81 mm – 12.7 mm (0.15” – 0.5”)
MP1021 Sensors
- Solid state reliability
- Flange-mount housing
- Stable output over operating temperature range
- Compatible with unregulated power supply
- Open collector (sinking or NPN) output can be used with bipolar or CMOS logic circuits with suitable pull-up resistor
- North pole sensitive
- Unipolar device
- RoHS compliant
- IP67
MP2007 Sensors
- Contacts hermetically sealed for long life
- Zero power consumption
- Suitable for DC and AC circuits
- RoHS compliant
- Mounting hardware included
- IP65
- Operate/Release Distances*: 3.81 mm – 12.7 mm (0.15” – 0.5”)
Distributor Stock Check.
Search our established network of franchised distributors and representatives
