AN8 Sensors
Description
Non-contact, intrinsically linear contact angle position sensors. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaftFeatures
- Angular position sensor with high tolerance for misalignment
- Non-contact angular position sensing and full 360⁰ rotation
- Custom programming available for: angle range, slope, PWM output, custom magnets – contact factory
- No mechanical interface means no parts to wear out or jam
- Available with Delphi connector or 12” (305 mm) wire leads
- RoHS compliant
- IP67
- Maximum air gap of 5.5 mm (0.22”)*
Application
- Implement (fork lift, agricultural trailer hitch, etc.) position sensing
- Steer, throttle by wire
- Gear selection
- Zero-contact encoder alternative
- Replacement for smart bearings
- Outboard trim sensing
- Steer, throttle by wire
Part Comparison
Swipe to Browse
| Part Number | Check Stock | Description | Sensing Range | Termination | Data | CAD |
|---|---|---|---|---|---|---|
|
AN820001 |
Sensor |
180° |
Packard Metri-pack connector |
|||
|
AN820002 |
Sensor |
360° |
Packard Metri-pack connector |
|||
|
AN820031 |
Sensor |
180° |
18 AWG x 305 mm |
|||
|
AN820032 |
Sensor |
360° |
18 AWG x 305 mm |
|||
|
AS500106 |
Magnet Carrier |
- |
- |
|||
|
CU103601 |
AN820001 sensor & AS500106 magnet carrier |
180° |
Packard Metri-pack connector |
|||
|
CU103602 |
AN820002 sensor & AS500106 magnet carrier |
360° |
Packard Metri-pack connector |
|||
|
CU103603 |
AN820003 sensor & AS500106 magnet carrier |
45° |
Packard Metri-pack connector |
It is the responsibility of the user to determine product suitability. Specifications are subject to change without notice.
*Actuator length based on distance from pivot point
Related Products
E-Bike Sensor
- Supply voltage: 6.5 – 20 VDC
- Signal Output low: 7+1.4/-1.1 mA
- Signal Output high: 14+2.8/-2.2 mA
- Operating frequency: 1 – 2.5 kHz
- Operating temperature: -25°C – 85°C
LIN Sensors – Kit with magnet
- Easy setup and robust monitoring with M4 screws
- Dual independent (redundant) outputs assure high reliability
- No mechanical interface means no parts to wear out or jam
- Comes with 20 AWG 305 mm (12”) discrete wire leads or harness with connector
- RoHS compliant
- IP68*
- Compliant to industrial/automotive EMC/EMI/ESD directives
ANG Sensors
- Angular position sensor with high tolerance for misalignment
- Non-contact angular position sensing and full 360O rotation
- Custom programming available for: angle range, slope, PWM output – contact factory
- No mechanical interface means no parts to wear out or jam
- Comes with 20 AWG 305 mm (12”) discrete wire leads
- RoHS Compliant
- IP68*
- Maximum air gap of 6 mm (0.24”)
- Compliant to industrial/automotive EMC/EMI/ESD directives
Speed & Direction Sensor Kit
- Capable of measuring from near zero up to 20 KHz.
- Variable shaft length (20 to 80 mm)
- Variable shaft diameter (12 to 20 mm)
- 2-wire, 3-wire, 4-wire output
- Cable interface (connector upon request)
- Rotatable shaft head (to determine angle of wire outlet)
- Flexible wire orientation (horizontal or right-angle)
- Wire harness option with customer-specific connector (available on request)
- Available with open-collector, PWM or Current signal outputs
AN1 Sensors
- Patented intrinsically linear angle position sensor (ILAPS)
- Magnet/sensor orientation provides linear output from 5⁰ to 85⁰ of rotation without the need for electrical compensation
- Return spring provides resistance to CCW motion
- Fully encapsulated electronics
- RoHS compliant
- IP67
AN8 Sensors
- Angular position sensor with high tolerance for misalignment
- Non-contact angular position sensing and full 360⁰ rotation
- Custom programming available for: angle range, slope, PWM output, custom magnets – contact factory
- No mechanical interface means no parts to wear out or jam
- Available with Delphi connector or 12” (305 mm) wire leads
- RoHS compliant
- IP67
- Maximum air gap of 5.5 mm (0.22”)*
AN9 Sensors
- Angular position sensor with high tolerance for misalignment
- Non-contact angular position sensing and full 360⁰ rotation
- Dual independent (redundant) outputs assure high reliability
- Custom programming available for: angle range, slope, PWM output, custom magnets - contact factory
- No mechanical interface means no parts to wear out or jam
- Comes with 18 AWG 305 mm (12”) wire leads
- RoHS Compliant
- IP68*
- Maximum air gap of 5.5 mm (0.22”)**
GS1001 – GS1002 Sensors
- From near zero speed up to 15 kHz sensing capability
- 10 bit dynamic threshold direction offers:
- – Automatically adjusting magnetic range
- – Self-compensating to target geometry
- Compatible with unregulated power supply
- RoHS compliant
- IP67
- Typical air gap of 1.5 mm*
GS1005 – GS1007 Sensors
- From near zero speed up to 15 kHz sensing capability
- 10 bit dynamic threshold direction offers:
- – Automatically adjusting magnetic range
- – Self-compensating to target geometry
- Compatible with unregulated power supply
- ROHS compliant
- IP67
- Typical air gap of 1.5 mm*
GS101201 – GS101202
- From near zero speed up to 15 kHz sensing capability
- Plastic flange-mount housing
- Compatible with unregulated power supply
- ROHS compliant
- IP67
- Typical air gap of 1.5 mm*
GS101205 Sensors
- From near zero speed up to 15 kHz sensing capability
- Plastic flange-mount housing
- Resistant to fuels, solvents, and lubricants associated with engines, transmissions, brakes and chassis systems
- ROHS compliant
- IP67
- Typical air gap of 1.5 mm*
GS102301 Sensors
- From near zero speed up to 15 kHz sensing capability
- Resistant to fuels, solvents, and lubricants associated with engines, transmissions, brakes and chassis systems
- Supplied with installed Viton O-ring
- Installs into a standard M20 X 1.5 O-ring port
- ROHS compliant
- IP67
- Typical air gap of 1.5 mm*
Distributor Stock Check.
Search our established network of franchised distributors and representatives
