ANG Sensors
Description
Description The ANG Series sensors are non-contact, intrinsically linear position sensors with one or two independent (redundant) outputs. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft. Actuator magnet part number AS500106 is required to assure proper operation (ordered separately).Features
- Angular position sensor with high tolerance for misalignment
- Non-contact angular position sensing and full 360O rotation
- Custom programming available for: angle range, slope, PWM output – contact factory
- No mechanical interface means no parts to wear out or jam
- Comes with 20 AWG 305 mm (12”) discrete wire leads
- RoHS Compliant
- IP68*
- Maximum air gap of 6 mm (0.24”)
- Compliant to industrial/automotive EMC/EMI/ESD directives
Application
- Hydraulic valves
- Hydraulic controls
- Electric drives
- Pneumatic controls
- Zero-contact encoder alternative
- Gear selection / shifting position
- Lifting / ride height position
- Throttle / pedal position
- Steering wheel position
- Hydraulic controls
Part Comparison
Swipe to Browse
| Part Number | Check Stock | Output | Interface | Data | CAD |
|---|---|---|---|---|---|
|
ANG-11HAW1 |
Analog single |
20 AWG x 305 mm (12") discrete wires |
|||
|
ANG-21HAW1 |
Analog dual |
20 AWG x 305 mm (12") discrete wires |
It is the responsibility of the user to determine product suitability. Specifications are subject to change without notice.
*Actuator length based on distance from pivot point
Related Products
E-Bike Sensor
- Supply voltage: 6.5 – 20 VDC
- Signal Output low: 7+1.4/-1.1 mA
- Signal Output high: 14+2.8/-2.2 mA
- Operating frequency: 1 – 2.5 kHz
- Operating temperature: -25°C – 85°C
LIN Sensors – Kit with magnet
- Easy setup and robust monitoring with M4 screws
- Dual independent (redundant) outputs assure high reliability
- No mechanical interface means no parts to wear out or jam
- Comes with 20 AWG 305 mm (12”) discrete wire leads or harness with connector
- RoHS compliant
- IP68*
- Compliant to industrial/automotive EMC/EMI/ESD directives
ANG Sensors
- Angular position sensor with high tolerance for misalignment
- Non-contact angular position sensing and full 360O rotation
- Custom programming available for: angle range, slope, PWM output – contact factory
- No mechanical interface means no parts to wear out or jam
- Comes with 20 AWG 305 mm (12”) discrete wire leads
- RoHS Compliant
- IP68*
- Maximum air gap of 6 mm (0.24”)
- Compliant to industrial/automotive EMC/EMI/ESD directives
Speed & Direction Sensor Kit
- Capable of measuring from near zero up to 20 KHz.
- Variable shaft length (20 to 80 mm)
- Variable shaft diameter (12 to 20 mm)
- 2-wire, 3-wire, 4-wire output
- Cable interface (connector upon request)
- Rotatable shaft head (to determine angle of wire outlet)
- Flexible wire orientation (horizontal or right-angle)
- Wire harness option with customer-specific connector (available on request)
- Available with open-collector, PWM or Current signal outputs
AN1 Sensors
- Patented intrinsically linear angle position sensor (ILAPS)
- Magnet/sensor orientation provides linear output from 5⁰ to 85⁰ of rotation without the need for electrical compensation
- Return spring provides resistance to CCW motion
- Fully encapsulated electronics
- RoHS compliant
- IP67
AN8 Sensors
- Angular position sensor with high tolerance for misalignment
- Non-contact angular position sensing and full 360⁰ rotation
- Custom programming available for: angle range, slope, PWM output, custom magnets – contact factory
- No mechanical interface means no parts to wear out or jam
- Available with Delphi connector or 12” (305 mm) wire leads
- RoHS compliant
- IP67
- Maximum air gap of 5.5 mm (0.22”)*
AN9 Sensors
- Angular position sensor with high tolerance for misalignment
- Non-contact angular position sensing and full 360⁰ rotation
- Dual independent (redundant) outputs assure high reliability
- Custom programming available for: angle range, slope, PWM output, custom magnets - contact factory
- No mechanical interface means no parts to wear out or jam
- Comes with 18 AWG 305 mm (12”) wire leads
- RoHS Compliant
- IP68*
- Maximum air gap of 5.5 mm (0.22”)**
GS1001 – GS1002 Sensors
- From near zero speed up to 15 kHz sensing capability
- 10 bit dynamic threshold direction offers:
- – Automatically adjusting magnetic range
- – Self-compensating to target geometry
- Compatible with unregulated power supply
- RoHS compliant
- IP67
- Typical air gap of 1.5 mm*
GS1005 – GS1007 Sensors
- From near zero speed up to 15 kHz sensing capability
- 10 bit dynamic threshold direction offers:
- – Automatically adjusting magnetic range
- – Self-compensating to target geometry
- Compatible with unregulated power supply
- ROHS compliant
- IP67
- Typical air gap of 1.5 mm*
GS101201 – GS101202
- From near zero speed up to 15 kHz sensing capability
- Plastic flange-mount housing
- Compatible with unregulated power supply
- ROHS compliant
- IP67
- Typical air gap of 1.5 mm*
GS101205 Sensors
- From near zero speed up to 15 kHz sensing capability
- Plastic flange-mount housing
- Resistant to fuels, solvents, and lubricants associated with engines, transmissions, brakes and chassis systems
- ROHS compliant
- IP67
- Typical air gap of 1.5 mm*
GS102301 Sensors
- From near zero speed up to 15 kHz sensing capability
- Resistant to fuels, solvents, and lubricants associated with engines, transmissions, brakes and chassis systems
- Supplied with installed Viton O-ring
- Installs into a standard M20 X 1.5 O-ring port
- ROHS compliant
- IP67
- Typical air gap of 1.5 mm*
Distributor Stock Check.
Search our established network of franchised distributors and representatives
